The Chibi Project - Beyblade Beystadium (Episode 21)

The Beyblade Beystadium was placed on an old picnic table outside Adequate.com's main office. The stadium included two small tops and a launching spinner for each. The stadium itself had a blue arena floor which would spin when the blue controls on the side were pulled out and pushed in. We started off by letting the tops spin the way the manufacturers intended. The tops had a relatively low RPM. Neither was powerful enough to knock the other out of the stadium. Pulling the levers made the tops spin around the arena more, but had little or no effect on the "battle". The tops were clearly not powerful enough. To provide more power to the tops, we selected a Dremel MultiPro Cordless 7.2V Model 770 Type 1. It features speeds of either 7500 RPM or 15000 RPM...not to mention the popular 0 RPM "OFF" setting. The white Beyblade top was placed at the end of a small screw attachment. It was firmly connected so that it would spin at the same rate as the rotary tool. We started off spinning the top at a rate of 7500 RPM. For the competition, we chose a Craftsman Variable Speed Rotary Tool to power the other top. With the tops mounted on the Dremel and Craftsman tools, it was time to do battle. We increased the Dremel's speed to 15000 RPM to make the fight fair. Applying a downward pressure, the tops began to leave marks on the stadium floor. This is the first sign of any damage to any pieces. The white top eventually came off, but the black/grey one kept going. With the white top no ...

Thanks To : you can find more Cheap and Buy Direct from Amazon